Racetech

Map Light - Variable Aperture

Map Light - Variable Aperture

Co-drivers Avanti rally map light with variable aperture. Has an adjustable flexible shaft and comes complete with an on/off switch. The beam comes out the side and the shroud is adjustable/variable to control the light output. Available in 12" (30cm) or 18" (46cm) length. Connect black wire to suitable earth and red wire to sidelight circuit or positive feed...

$89.99 Ex Tax: $81.81

Ex Tax: $81.81
Map Light - Cone

Map Light - Cone

Co-drivers Avanti rally map light with cone. Has an adjustable flexible shaft and comes complete with an on/off switch and mounting screws. Available in 12" (30cm) or 18" (46cm) length. Connect black wire to suitable earth and red wire to sidelight circuit or positive feed...

$79.99 Ex Tax: $72.72

Ex Tax: $72.72
Simulator Seat Slider

Simulator Seat Slider

Adjust the seating position when your mates come over or run driver changes during endurance events, our sim seat slider assembly provides you with all the options! The simulator seat slider assembly is made up of two parts. In many cases, both the steel sliders and the 4mm alloy base plate are required for this installation to work on our Simulator Chassis. Before installation o..

$94.99 Ex Tax: $86.35

Ex Tax: $86.35
Simulator Logitech & Thrustmaster Shifter Mount

Simulator Logitech & Thrustmaster Shifter Mount

Our Logitech and Thrustmaster shifter mount is made from laser-cut, precision folded, high-grade aluminium. Installation is easily done by selecting your desired position then fasten in place by using the hardware supplied. Can be mounted on the left or right-hand side of the chassis. Dimensions: Height - 460mm Width - 120mm Length - 120mm Weight - 825grams  ..

$99.99 Ex Tax: $90.90

Ex Tax: $90.90
Simulator Fanatec / TSSH Shifter Mount

Simulator Fanatec / TSSH Shifter Mount

Fanatec Clubsport shifter mount made from laser-cut, precision folded, high-grade aluminium. The bracket is also drilled to fit the Thrustmaster TSS Handbrake and sequential shifter. Installation is easily done by selecting your desired position then fasten in place by using the hardware supplied.   Can be mounted on the left or right-hand side of the chassis. Dim..

$69.99 Ex Tax: $63.63

Ex Tax: $63.63
Simulator Jinx Shifter Mount

Simulator Jinx Shifter Mount

Racetech Jinx shifter mounting bracket for our Simulator chassis. Build yourself an immersive and accurate Supercars simulator rig.  Can be mounted on the left or right-hand side of the chassis Dimensions: Height - 465mm Width - 120mm Length - 240mm Weight - 830grams..

$99.99 Ex Tax: $90.90

Ex Tax: $90.90
Simulator Simworx Shifter Mount

Simulator Simworx Shifter Mount

Our Simworx Shifter Mount is made from laser-cut, precision folded, high-grade aluminium. Installation is easily done by selecting your desired position then fasten in place using the supplied hardware.   Can be mounted on the left or right-hand side of the chassis. Dimensions Height - 195mm Width - 180mm Length - 95mm Weight - 565grams..

$59.99 Ex Tax: $54.54

Ex Tax: $54.54
Simulator Direct Drive Steering Wheel Mount

Simulator Direct Drive Steering Wheel Mount

Our Direct Drive Steering Wheel Mount is made from laser-cut, precision folded, high-grade aluminium.  Designed specifically not to flex under load. Installation is easily done by selecting your desired position on the front face of the bulkhead then fasten in place using the hardware supplied. Dimensions: Height - 180mm Width - 345mm Length - 350mm We..

$169.99 Ex Tax: $154.54

Ex Tax: $154.54
Simulator Simucube Wheel Adapter

Simulator Simucube Wheel Adapter

Simucube adapter for Simucube 2 and Simucube Pro Direct Drive wheel bases. This adapter is used in conjunction with our Direct Drive mount sold separately here. Made from laser-cut, precision folded, high-grade aluminium. Height - 140mm Width - 280mm Length - 265mm Weight - 1.55kg..

$154.99 Ex Tax: $140.90

Ex Tax: $140.90
Simulator Three Screen Mount

Simulator Three Screen Mount

Our three-screen mount is made from laser-cut, precision folded, high-grade aluminium. Installation is done simply by mounting the three-screen mount to the existing bolt holes on the front face of the screen mount as seen in image 2 and 3. Suitable for a maximum of 32-inch monitors. VESA 75x75mm and 100x100mm compatible. Dimensions: Height - 100mm Width - 270m..

$409.99 Ex Tax: $372.72

Ex Tax: $372.72
Simulator Keyboard Tray and Bracket

Simulator Keyboard Tray and Bracket

Our keyboard tray is made from laser-cut, precision folded, high-grade aluminium. Installation is easily done by mounting the keyboard shelf bracket to the inner right-hand corner of the simulator bulkhead utilizing the 2nd and 3rd bolt holes using the supplied hardware.   Can be mounted on the left or right-hand side of the bulkhead - please specify which side ..

$144.99 Ex Tax: $131.81

Ex Tax: $131.81
Simulator Mouse Tray

Simulator Mouse Tray

The Racetech Simulator Mouse Tray quickly bolts to the steering wheel mount (standard or direct drive wheel mount) on your Sim Chassis using the supplied hardware and backing plate. It can be mounted on the left or right-hand side and flipped over to adjust the height. Mouse not included. Dimensions: Height - 40mm Width - 200mm Length - 180mm Weight - 0.5Kg..

$29.99 Ex Tax: $27.26

Ex Tax: $27.26
Simulator Overhead Monitor Mount

Simulator Overhead Monitor Mount

Our Overhead Monitor Mount is made from laser-cut, precision folded, high-grade aluminium. Suits either our triple monitor mount or our standard screen mount. Mounting bolts included. Suitable for a monitor up to 32-inch in size. VESA 75x75mm and 100x100mm compatible. Dimensions: Height - 700mm Width - 210mm Length - 380mm Weight - 1.58kg  ..

$139.99 Ex Tax: $127.26

Ex Tax: $127.26
Simulator PC Shelf

Simulator PC Shelf

Our PC shelf is made from laser-cut, precision folded, high-grade aluminium and it bolts to the front of the Racetech Simulator chassis. We now have 2 shelf sizes available. Installation is done simply by mounting the PC shelf to the existing bolt holes on the front end of the simulator chassis as shown in image 2. Standard Shelf Dimensions: Height - 100mm Width - 270mm Length - 48..

$109.99 Ex Tax: $99.99

Ex Tax: $99.99
Simulator Drink Holder

Simulator Drink Holder

Our Simulator Drink Holder is made from laser-cut, precision folded, high-grade aluminium. Installation is simply done by placing over the simulator chassis rail and fastening in place using the hardware supplied. Can be mounted on the left or right-hand side of the chassis. Dimensions: Height - 165mm Width - 100mm Length - 160mm Weight - 200grams..

$34.99 Ex Tax: $31.81

Ex Tax: $31.81
Simulator Headset Hook

Simulator Headset Hook

Our Simulator Headset Holder is made from laser-cut, precision folded, high-grade aluminium. Installation is simply done by placing over the simulator chassis or accessory rail.   Height - 50mm Width - 30mm Length - 100mm Weight - 45 grams..

$24.99 Ex Tax: $22.72

Ex Tax: $22.72
Racetech Beanie

Racetech Beanie

Racetech embroidered black beanie. We know from experience that these are a lifesaver on early morning rally stages!  One size fits most.  ..

$9.99 Ex Tax: $9.08

Ex Tax: $9.08
Racetech Cap

Racetech Cap

Racetech baseball cap. One size fits most...

$19.99 Ex Tax: $18.17

Ex Tax: $18.17
Snap Back Cap

Snap Back Cap

Racetech flat peak snap-back cap. One size fits most...

$19.99 Ex Tax: $18.17

Ex Tax: $18.17
Carbon Drivers Foot Rest

Carbon Drivers Foot Rest

High quality, lightweight footwell/footrest ideal for the drivers side of both FWD and RWD cars. Full carbon construction. The footrest has a textured grip to prevent your feet from slipping and high sides to prevent feet and ankles from bashing against the rollcage or other parts of the chassis.  Dimensions: 40mm (H) x 400mm (W) x 470mm (D)...

$255.00 Ex Tax: $231.82

Ex Tax: $231.82
Showing 41 to 60 of 72 (4 Pages)